f8b064a664 For example: LOAD C:NOVELLCLIENT32CE100B.LAN SPEED=0 IOMAPMODE=0 FORCEDUPLEX=0 FRAME=ETHERNET802.2 SLOT=e When you reboot, you will be prompted with the correct value. Figure 7: The SNMP Configuration window. Note that 32-bit drivers do not use NET.CFG for configuration settings such as frame type, interrupt, I/O port, and retries. Or you can extract them to diskettes, and run INSTALL from disk 1. In this screen, you first select the backup server that is running the tsasms.nlm for SBACKUP or equivalent backup software. If you are using a 16-bit LAN driver, you should have an .INS file that contains configuration information about the 16-bit .COM driver. A different set of support drivers will be loaded when you bring up Client 32 on the workstation. Check the date of the ETHERTSM.NLM file. Users can benefit from dynamic client-side (local) caching for faster performance of repetitive desktop functions. Tips.
Figure 2: The NetWare Client 32 for DOS/Windows home page. BINDERY Bindery Services Also a child module to the Name Service Multiplexor. Note: For a discussion of changing NET.CFG parameters,including the NET.CFG parameters that affect the NIOSmodule, see "Setting NET.CFG Parameters Through theNWSETUP.EXE Utility" in this issue. The STARTNET.BAT file then loads the topology support module for your network. The Novell Support Connection web site: . AUTOEXEC.BAT . LIEBING Research Engineer Systems Research Department 01 May 1996 NetWare Client 32 for DOS/Windows features an improved installation process, including both DOS-based and Windows-based installation programs.